1 Features
• AEC-Q100 Qualified for Automotive Applications
– Device Temperature Grade 1:
–40°C to +125°C TA
• Advanced Load Diagnostics
– DC Diagnostics run without Input Clocks
– AC Diagnostic for Tweeter Detection with Impedance and Phase Response
• Easily meet CISPR25-L5 EMC Specification
• Audio Inputs
– 4 Channel I 2S or 4/8-Channel TDM Input
– Input Sample Rates: 44.1 kHz, 48 kHz, 96 kHz
– Input Formats: 16-bit to 32-bit I 2S, and TDM
• Audio Outputs
– Four-Channel Bridge-Tied Load (BTL)
– Two-Channel Parallel BTL (PBTL)
– Up to 2.1 MHz Output Switching Frequency
– 27 W, 10% THD Into 4 Ω at 14.4 V BTL
– 45 W, 10% THD Into 2 Ω at 14.4 V BTL
– 80 W, 10% THD Into 2 Ω at 18 V PBTL
• Audio Performance Into 4 Ω at 14.4 V BTL
– THD+N < 0.02% at 1 W
– 42 µVRMS Output Noise
– –90 dB Crosstalk
• Load Diagnostics
– Output Open and Shorted Load
– Output-to-Battery or Ground Shorts
– Line Output Detection Up to 6 kΩ
– Host-Independent Operation
• Protection
– Output Current Limiting
– Output Short Protection
– 40 V Load Dump
– Open Ground and Power Tolerant
– DC Offset
– Overtemperature
– Undervoltage and Overvoltage
• General Operation
– 4.5 V to 18 V Supply voltage
– I 2C Control With 4 Address Options
– Clip Detection and Thermal Warning
2 Applications
• Automotive Head Unit
• Automotive External Amplifier